| System | |||||
| Main Processor | 64 bit 4 core CPU | ||||
| Operating System | Embedded LINUX | ||||
| Memory | 4GB | ||||
| Chassis | 1.0mm SGCC steel plate | ||||
| Interface | |||||
| Network Port | 4 RJ-45 Ports(10/100/1000Mbps ) | ||||
| Ethernet Port | 4 Ethernet Ports Joint Working or 4 Independent 1000Mbps Ethernet Ports |
||||
| RS232 | Reserved | ||||
| RS485 | Reserved(reusable with alarm port) | ||||
| Alarm input/output | Reserved(reusable with alarm port) | ||||
| USB Port | Front panel: 2× USB 3.0, Rear panel: 2 × USB 2.0 | ||||
| HDMI | 2 HDMI, one as network config, another as spare | ||||
| VGA | 1 VGA, as network config | ||||
| HDD Installation | Built-in 1× 1T HDD disk (2.5″) for system Support 3HDD disks (2.5″) for Picture storage |
||||
| Video Management | |||||
| Number of Connected Cameras Per Server | 256 IP devices and 256 channels | ||||
| ONVIF Device | 50 | ||||
| Auto-Register | 200 | ||||
| Clients Per System | 50 Online Users | ||||
| Numbers of Users | Unlimited | ||||
| Numbers of Roles | 100 | ||||
| Mobile DVR Device | 50IP, 200channels | ||||
| Bandwidth of Video Input per Server | 300 Mbps | ||||
| Bandwidth of Video Output per Server | 300 Mbps | ||||
| Alarm Inputs | 20/s (Average), 80/s (Peek) | ||||
| Other | |||||
| Power | 100V ~ 240V, 47 ~ 63Hz | ||||
| Consumption | 35W ~ 50W (with HDD) | ||||
| Working Environment Temperature | 0℃~ 50℃ | ||||
| Working Environment Humidity | 5%~90% (non-condensation) | ||||
| Storage Environment Temperature | -20℃~ ﹢70℃ | ||||
| Storage Environment Humidity | 5% ~ 90% (non-condensation) | ||||
| Working Altitude | -60m ~ 3000m | ||||
| Weight (Without Package) |
4.5Kg | ||||
| Dimension | 1U, 440mm×398.6mm×43.6 mm | ||||
| Installation Method | Standard 19″ rack installation | ||||
DSS4004
General Surveillance Management Center
System Stability
- Embedded Linux System, C/S Architecture
- Support 7*24 stable operation
- Support distribute and cascade deployment
- Support hot standby for master server
- Supports RAID 0/1/5/10
- Support N+M hot standby for slave server
High Compatibility
- All Dahua’s devices included: network camera, network speed dome, NVR, DVR, MDVR, ITC, Access control, VDP, Alarm Controller, etc.
- Connect third-party devices via standard ONVIF protocol
- Offer the platform SDK for third-party platform or mobile phone do further development
High Flexibility and Scability
- Up to 20 slave servers can be managed per master server
- Support up to 5-level cascade
- Support unlimited accounts management, 50 online users and 100 roles
- Support 256 IP devices and 256 channels
- Support 50 Onvif devices
- Supports 100 IP Access Controls or Alarm Controllers and 200 channels
Not available.
Not available.




